Yodify Product Library
Instantly add the Externally Heated Desiccant Air Dryer - ZHA Series and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Externally Heated Desiccant Air Dryer - ZHA Series
Brand: ZanderA Parker ZANDER ZHA Series Externally Heated Desiccant Air Dryer will effectively remove contaminants found in compressed air.
The traditional adsorption principle used in this design is simple, robust and flexible.
Continuous drying is accomplished by the operation of two desiccant towers.
Compressed air is dried through one tower while the other desiccant tower is being regenerated.
The regeneration heating cycle of desiccant is accomplished using a dry air purge flow heated by an external electric heater.
The regeneration cooling cycle is performed using the same flow of dry compressed air taken from the dryer outlet to ensure continuous dewpoint performance.
High levels of reliability are achieved by the use of proven engineering technology and components.
Compressed air purification equipment must deliver uncompromising performance and reliability while providing the right balance of air quality with the lowest cost of operation.
Many manufacturers offer products for the filtration and purification of contaminated compressed air, which are often selected only upon their initial purchase cost, with little or no regard for the air quality they provide, the cost of operation throughout their life or indeed their environmental impact.
When purchasing purification equipment, delivered air quality, the overall cost of ownership and the equipment's environmental impact must always be considered.
Features- Flow range starting at 250 scfm (425 m³/hr)
- Delivered air quality is in accordance with ISO 8573-1:2001, the international standard for compressed air quality.
- Pressure dewpoints of -100 °F (-70 °C) & -40 °F (-40 °C) (ISO 8573-1 :2001 Classes 1 & 2) are available.
- Parker ZANDER High Efficiency Microfilter pre- and after-filters – Standard ecotronic Energy Management System available - Optional
- Low-wattage high incoloy sheathed heater for efficient regeneration
- Parker non-lubricated full-flow angle seat valves, which carry a FIVE YEAR WARRANTY, are standard on dryers up to 800 scfm.
- High performance, rotary actuated switching valves, which carry a FIVE YEAR WARRANTY, are standard on dryers 1000 scfm and larger.
- Insulated tower, heater and purge lines increase dryer performance and efficiency by reducing radiant heat loss plus keeps the unit with the safety parameters set forth by OSHA.
- Easy to use iDemand Center affords superior dryer control along with digital telemetry for remote analysis of performance.
Specifications
Brand
After-Filter Part Number
- Consult Factory
- FT6-1803-HT
- FT6-1201-HT1
- JC0350-FH
- JC0450-FH
- JC0625-FH
- JC0800-FH
- JC1008-FH
- FT3-801-HT
- FT4-1201-HT
- FT4-1201-HT1
- FT6-1201-HT
- JC0150-FH
After-Filter Replacement Element
- JE-FC0450-HT
- JE-FC0625-HT
- JE-FC0800-HT
- JE-FC1330-HT
- JE-FC1500-HT
- JE-FC2000-HT
- JE-FC3000-HT
- JE-FC4000-HT
- (3) JE-FC2500-HT
- Consult Factory
- JE-FC0350-HT
- JE-FC0150-HT
Connection Type
- 1” NPT
- 1-1/2” NPT
- 2” NPT
- 3” Flange
- 4” Flange
- 6” Flange
- 8” Flange
Depth (inch)
- 18, 22, 27, 28, 35, 41, 60, Consult Factory
- 22
- 27
- 28
- 35
- 41
- 60
- Consult Factory
Dryer Technology
- Heated
- Externally Heated
- Desiccant
- Desiccant, Externally Heated
Height (inch)
- 83, 85, 87, 88, 89, 92, 93, 102, 113, 110, 112, Consult Factory
- 85
- 87
- 88
- 89
- 92
- 93
- 102
- 110
- 112
- 113
- Consult Factory
Installed Condensate Drain
- Demand Solenoid Drain
- Timed Solenoid Drain
Maximum Ambient Temperature
- 120° F
Maximum Flow Rate (m³/hr)
- 425
- 340
- 229
- 510
- 680
- 1019
- 13592
- 10194
- 8495
- 6796
- 5097
- 4417
- 3398
- 2548
- 2038
- 1699
- 1359
- 850
- 170, 229, 340, 425, 510, 680, 850, 1019, 1359, 1699, 2038, 2548, 3398, 4417, 5097, 6796, 8495, 10194, 13592
Maximum Operating Pressure
- 135 psi
- 150 psi
Maximum Operating Temperature
- 120° F
Minimum Ambient Temperature
- 40° F
Minimum Operating Pressure
- 80 psi
Minimum Operating Temperature
- 50° F
Pre-installed Optional Accessories
- Pre & after Filtration
Prefilter Part Number
- GL9XLD-N
- GL11XLD-N
- GL12XLD-N
- GL13XLD-N
- GL17XLD-N
- GL19XLD-N
- DH-TF19XPDF-1
- DH-TF30XPDF-1
- DH-TF40XPDF-1
- DH-TF50XPDF-1
- DH-TF60XPDF-1
- Consult Factory
- GL14XLD-N
Prefilter Replacement Element
- CP3025XL
- CP3040XL
- CP4040XL
- CP4050XL
- CP4065XL
- CP5065XL
- CP5080XL
- 5075XP
- (3) 3075XP
- (4) 3075XP
- (5) 3075XP
- (6) 3075XP
- Consult Factory
Purge Rate
- 7, 9.45, 14, 17.5, 21, 28, 35, 42, 56, 70, 84, 105, 140, 182, 210, 280, 350, 420, 560
- 9.45
- 14
- 17.5
- 21
- 28
- 35
- 42
- 56
- 70
- 84
- 105
- 140
- 182
- 210
- 280
- 350
- 420
- 560
Rated Inlet Pressure
- 100 psi
Type
- Heated
Weight (Lbs)
- 680, 720, 920, 1180, 1370, 1400, 2060, 2350, 3035, 4195, 5215, 7765, 8565, 11562, 12002, Consult Factory
- 720
- 920
- 1180
- 1370
- 1400
- 2060
- 2350
- 3035
- 4195
- 5215
- 7765
- 8565
- 11562
- 12002
- Consult Factory
Width (inch)
- 31, 40, 43, 47, 50, 52, 63, 74, 78, 96, Consult Factory
- 40
- 43
- 47
- 50
- 52
- 63
- 74
- 78
- 96
- Consult Factory