Intelligent Photo/Heat Detector

The Intelligent Photoelectric/heat, spot-type smoke detectors, P/N 63-1053 & 63-1059, have sensing chambers that utilize the light scattering principle to detect smoke.

In addition, the detector is equipped with dual thermistors for heat sensing. The sensing chamber employs features that minimize the effect of settled dust on performance.

The detector is designed with tri-color LEDs to indicate detector status. A remote LED annunciator, P/N 02-3868, is available as an accessory.

It can be configured to follow the detector LED operation or be independently controlled. The heat element of the detector provides an alarm, while the photo element can be programmed as alarm or supervisory.

The isolator version, P/N 63-1059, provides complete short circuit isolation for NFPA 72, Class X wiring if used with an isolator base. The detector is compatible with Fike’s CyberCat® and Cheetah® Xi intelligent control panels.

Its operating parameters are configured using the panel’s programming software and are stored within non-volatile RAM in the detector.

This on-board intelligence allows each detector to communicate its status directly to other devices connected to the panel.

This peer-to-peer digital protocol results in less information that needs to be sent between the detector and the host control panel, resulting in faster, more reliable communication.