Yodify Product Library
Instantly add the TUV Turbine Wheel Flowmeter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
TUV Turbine Wheel Flowmeter
Brand: KOBOLD Instruments, IncThe TUV Model turbines are based on the principle of the Woltmann rotating vane meter. A turbine wheel of negligible mass is concentrically mounted in a pipe and supported by bearings.
The liquid flows through the turbine wheel in the axial direction. The medium flow is smoothed by a flow straightener, and reaches the turbine wheel as a quasi-laminar flow stream.
The speed of the turbine wheel is proportional to the average flow velocity across the pipe cross-section. The rotational speed is thus proportional to the volumetric flow over a wide range.
An inductive transducer screwed into the turbine housing senses the speed of the turbine wheel in a non-contacting manner.
The sensor signal is amplified and converted to produce a pulse signal. The pulse count per time unit is proportional to the actual flow rate.
All turbines are calibrated and delivered with their own calibration reports. Variations in viscosities in your application can be taken into consideration during calibration of the most commonly found viscosities.
1 - 11 of 11 Part Numbers
TUV-1200
- Measuring Range - 0.3 to 1.5 L/min
TUV-1201
- Measuring Range - 0.5 to 4 L/min
TUV-1202
- Measuring Range - 0.8 to 6 L/min
TUV-1203
- Measuring Range - 1.2 to 10 L/min
TUV-1204
- Measuring Range - 2 to 20 L/min
TUV-1205
- Measuring Range - 3.3 to 33 L/min
TUV-1206
- Measuring Range - 6 to 60 L/min
TUV-1207
- Measuring Range - 8.5 to 85 L/min
TUV-1208
- Measuring Range - 15 to 150 L/min
TUV-1209
- Measuring Range - 30 to 360 L/min
TUV-1210
- Measuring Range - 35 to 400 L/min
1 - 11 of 11 Part Numbers
Specifications
Brand
Applications
- Fuel
- Light Heating Oil
- Liquefied Gases
- Meter the Flow of Liquids of Low Viscosity
- Pharmaceutical Liquids
- Serve to Precisely Measure Actual Flow Rates
- Tap Water & Demineralized Water
- Turbine Flow Rate Measuring Transducers
Bearing Material
- HM
- Sapphire
BSP Connection
- G 1” Female
- G 1/4” Female
- G 1-1/2” Female
- G 3/4” Female
- G 3/8” Female
Electrical Connectors
- 5-Pin M12
Enclosure / Body Material
- 303 Stainless Steel - Case/Interior Sections
Filter
- 100 to 300 µm (TUV-1205 to TUV-1206) - Recommended Filter
Flow Rate
- Liquids: 0 to 847 scfh (0 to 400 L/minute)
Frequency
- 925 to 2200 Hz
Input Power
- 10 to 30 Vdc - Auxiliary Power
K-Factor
- 130 to 32,500 Lmp./l
Linearization
- ± 1 % of Reading
Materials of Construction
- 329 Stainless Steel - Turbine Wheel
- 434 Stainless Steel - Turbine Wheel
Maximum System Pressure
- psi: 9,137 (kPa: 63,000, bar: 630)
Output
- Push-Pull
Repeatability
- ± 0.1 %
Response Time
- 5 to 50 milliseconds
Supply Voltage
- 30 V Umax - Voltage Level
Temperature Range
- -40° to 125° C (-40° to 257° F) - Max.