Yodify Product Library
Instantly add the Series MPC Pump Controller and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Series MPC Pump Controller
Brand: Dwyer Instruments, LLCThe Mercoid® MPC Pump Controller provides versatile level control in a standard 1/4 DIN package.
Designed for use with almost any style level transmitter the unit displays the present level and main set point value.
Incorporated in the MPC is programmable level differential for on/off control of one or two pumps, valves, or other devices through two SPDT relays. Also featured are two additional programmable alarm contacts with front alarm light indication.
The MPC is flexible and incorporates a user-friendly programming menu. The front face meets NEMA 4X for outdoor panel mounting.
So many features are combined into the MPC that it eliminates many components in a pump control system.
Features- Selectable pump alternation when used with two pumps to minimize pump wear, with alternation “on” a seal failure or over temperature condition will force the non-failed pump to lead status and stop alternation
- Alarms can be programmed for output indication of pump seal failure or over temperature
- Selectable time delay, for pump two, on power up to prevent both pumps from starting at the same time
- In the event of power loss, upon regaining power a time delay of up to 60 seconds can be selected to prevent excessively large current draw
- Integral 24 Vdc power supply to power level transmitter
- Displays pump run time from a front panel button
- Test system function simulates the process input to ensure the pumps are operating or to test programming
- User selectable security lock-out of programming and/or set points
- Process input retransmission as a current (4 to 20 mA) or voltage (2 to 10 Vdc) Analog signal (standard model MPC is set for current retransmission. For voltage retransmission add suffix “-RV”)
- Two additional programmable alarm contacts with front alarm light indication
- Front Panel face meets NEMA 4X for outdoor panel mounting
- User-Friendly Programming Menu
1 - 3 of 3 Part Numbers
1 - 3 of 3 Part Numbers
Specifications
Brand
Accuracy
- ± 0.25 % of Span, ± 1 Least Significant Digit
Ambient Temperature Range
- -10° to 55° C (14° to 131° F)
Approvals & Certifications
- CE
- cUL
Communication
- RS-232 with Modbus Communication Protocol
- RS-485 Modbus Communication Protocol
Consumption
- 3 mA - Seal Failure (Moisture Sensor)
- 7.5 VA, Max.
Display
- 0.56” High LED’s
- 7-Segment
- Two 4-Digit
Electrical Rating
- 10 A at 240 Vac Resistive, 1/10 hp at 120 Vac - Alarm Relays
- 10 A at 240 Vac Resistive, 1/4 hp at 120 Vac, 1/3 hp at 240 Vac - Control Relays
Environmental Protection
- IP66
- NEMA 4X
- Weatherproof
Humidity
- 0 to 90 % at 40° C (104° F) Non-Condensing
- 10 to 50 % at 55° C (131° F) Non-Condensing
Input
- 2-10 Vdc
- 4-20 mA DC
Input Impedance
- 10 ohms - Current
- 100 kiloohms - Voltage
Power
- 2.5 Vdc - Seal Failure (Moisture Sensor)
Power Options
- Loop Power: 24 Vdc at 50 mA, Regulated (Isolated)
Power Requirement
- 100 to 240 Vac Nominal, +10 %-15 %
- 132 to 240 Vdc Nominal, +10 %-15 %
- 50/400 Hz
Resolution
- 10 to 500 kiloohms
- One Count - Display
Switch Type
- SPDT - Control Relays
- SPST - Alarm Relays
- Water and Wastewater
- Sump and Sludge Pits, Clarifiers, Digesters
- Chemical Storage Tanks
- Oil Tanks
- Reservoirs