Yodify Product Library
Add the InSight 95DSS2 Flame Scanners to your store or catalog
Book Your Demo and See How
or create your store
InSight 95DSS2 Flame Scanners
Brand: Fireye, IncThe Fireye InSight® Type 95DSS2 flame scanners are microprocessor-based flame scanners utilizing solid-state dual (IR and UV) sensors.
The Fireye InSight Type 95DSS2 flame scanners incorporate an internal flame relay with adjustable ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier.
All Fireye inSight scanner models are powered by 24 Vdc, have either a twelve-pin electrical quick disconnect or 10 ft. cable (“CG” models), and contain electronic self-checking (no mechanical shutter required).
The scanners contain an eight-character alpha-numeric LED display and a four push-button keypad to enable the user to view operating parameters and select setpoints.
Specifications
Brand
Environmental
- NEMA 4X, IP66, Class I, Div. 2, Groups A, B, C & D, Class II, Div. 2, Groups F& G (refer to agency approvals table)
Housing Material
- Cast Aluminum with Gray Polyester Powder Coat Finish
Housing Weight
- 4.3 lb (1.96 kg), Non-"CG" Models
- 5.9 lb (2.69 kg) "CG" Model
- 6.3 lb (2.89 kg) "CEX" Models
Mounting
- Requires one of two Threaded Mounting Flanges, Ordered Separately (see below). For Fiber Optic Mount, refer to bulletin CU-101
Mounting Flange Kit
- P/N 60-2692: 1" NPT Female Pipe Mount with 3/8" NPT Female Cooling Air Connection, includes 1" NPT x 3" long Heat Insulating Nipple (P/N 35-127-1)
- P/N 60-2693: 1" BSP Female Pipe Mount with 3/8" BSP Female Cooling Air Connection, includes 1" BSP x 3" long Heat Insulating Nipple (P/N 35-127-3)
Mounting Flange Shipping Weight
- 0.62 lb (0.28 kg)
Cooling / Purge Air Requirements
- Source: Clean, Dry, Cool
- Volume: 4 scfm (113 L/min) at 3/8" Threaded mounting flange, or 1 inch "Y" fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 scfm (425 L/min)
- Pressure: Adequate to overcome Furnace or Windbox Pressure
Temperature Rating
- -40° to + 150° F (-40° to +65° C), Ambient
- -40° to 178° F (-40° to 81° C), Scanner Internal Temperature
Humidity
- 0 % to 95 % RH, Non-Condensing
Input Power
- 24 Vdc, +10 %, -15 % Supply Current: 0.35 A, 8.5 VA
Electrical Connection
- 12-pin Quarter-Turn Quick-Disconnect
- "CG" Models have Cable Gland and 10 ft (3 m) of Captive Cable
- "CEX" Models have 3/4" Threaded Opening and Internal Terminal Blocks
Relay Output
- Flame Relay, SPST (N.O.)
- Fault Relay, SPST (N.C.)
Contact Rating
- Minimum: 10 mA @ 5 Vdc
- Maximum: 2 A @ 30 Vdc | 2 A @ 50 Vac (CE Approved Models) | 2 A @ 240 Vac (FM & UL Models and all "CG" Models)
Analog Output
- 4-20 mA DC Current, Referenced to 24 Vdc Common, max.
- Connected Load: 750 ohms
Status Indication
- Eight (8) Character Alpha-numeric LED Display (Scrolling Capability)
Operator Interface
- Four (4) Pushbutton Style Keys
Cable Specification
- P/N 59-497
- Multi-core, 12 conductor (color coded), with foil wrap and overall braided shield
- Six #18 AWG and four #22 AWG conductors, plus one #22 AWG twisted pair
- Cable Jacket: Irradiated Modified Polyolefin (Flame-Retardant, Low Smoke, Zero Halogen)
- Maximum Temperature: 257° F (125° C)
- Nominal O.D. 0.41" (10.4 mm)
- Maximum O.D. 0.43" (10.9 mm)
- Maximum Cable Length 1000 ft (305 m)
Documentation
Application Diagrams
- MF-00-2-000F-0-007-B - Coal Fired Power Stations pdf 887 KB
- MF-00-2-000F-0-014-B - HVAC pdf 846 KB
- MF-00-2-000F-0-014-B - Industrial & Commercial Boiler pdf 751 KB
- MF-00-2-000F-0-015-B - Oil Refinery pdf 1.0 MB
- MF-00-2-000F-0-016-B - Cement Kilns pdf 464 KB
- MF-00-2-000F-0-026-B - Steel Mills pdf 468 KB
- MF-00-2-000F-0-027-B - Hazardous Waste Incinerator pdf 504 KB
- MF-00-2-000F-0-028-B - Sulfur Recovery Unit pdf 1.0 MB
- MF-00-2-000F-0-029-B - Municipal Solid Waste Incinerator pdf 507 KB
- MF-00-2-000F-0-030-B - FPSO pdf 796 KB
- MF-00-2-000F-0-031-B - FLNG pdf 790 KB
- MF-00-2-000F-0-044-A - Gypsum Plant pdf 750 KB
- MF-00-2-000F-0-045-A -Ammonia Plant pdf 1.3 MB
- MF-00-2-000F-0-046-A - Combine Cycle Power Plant pdf 390 KB
- MF-00-2-000F-0-047-B - Black Liquor Plant pdf 1.1 MB
Manuals
Obsolete Products
Presentations
Product Overview
Technical Instructions
- 59-4647-10TB Conversion Box for InSight I to InSight II Scanners, 133-730 pdf 99 KB
- 60-2721-X Replacement Electronics Assembly for InSight I CEX Scanner, 133-752 pdf 779 KB
- 61-7379 Cable Adapter, 133-768 pdf 110 KB
- 95-Series InSight Fiber Optic Flame Scanners, 133-720 pdf 32 KB
- Adapter Kit Installation Instructions for Det-Tronics Fiber Optics to InSight Scanner, 133-692 pdf 105 KB
- Installation instructions for 129-193 Adapter Kit Insight II Fiber Optics, 133-754 pdf 172 KB
- Installation Instructions for InSight Cable Connector Kit, 133-656 pdf 90 KB
- Installation of IR Filter and O-Ring Retainer for Insight 95IRS2-2 Flame Scanners, 133-711 pdf 20 KB
- PLTC-ER Cable, 133-769 pdf 161 KB