Yodify Product Library
Instantly add the Anybus Wireless Bridge II and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Anybus Wireless Bridge II
Brand: HMS Industrial NetworksAnybus Wireless Bridge enables you create a robust wireless connection between two points in an industrial Ethernet network. This second generation of the proven and trusted product can communicate via both Bluetooth and WLAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable.
Features- Range up to 400 meters.
- Rugged design with IP65-classed housing.
- Easy configuration via push button or via web configuration pages.
- Full compatibility with Anybus Wireless Bolt — a wireless product for machine mounting.
- Connects to your machine via Ethernet.
- Simultaneous operation of Bluetooth and WLAN allowing for bridging between the two.
Specifications
Brand
Approvals & Certifications
- (Sinosodial Vibration Test According to IEC 60068-2-6:2007, Shock Test According to IEC 60068-2-27:2008) & with Extra Severities
- FCC 47 CFR Part 15, Subpart B
- ICES-003
- MIC
- NCC
Approvals & Certifications
- ATEX: ATEX/IECEX Category 3, Zone 2 According to EN 60079-0, & EN 60079-7
- KCC
- Radio Equipment Directive (RED) 2014/53/EU
- UL (OrdLoc: NRAQ-Programmable Controllers According to UL 61010-2-201 & NRAQ7-Process Control Equipment According to CSA 61010-2-201, UL File E214107) (HazLoc: NRAQ-Programmable Controllers According to USL ANSI/ISA-12.12.01 (Class I, Div. 2) & CNL C22
Communication
- Antenna [Internal - 2.4 GHz: Max.
- BACnet / IP
- Bluetooth
- EtherNet/IP
- Modbus-TCP
- PROFINET
- WLAN
Consumption
- Bluetooth & Bluetooth Low Energy (Power): 36 mA at 24 Vdc
- Power: 0.7 W Idle
- Power: 1.7 W, Max.
- WLAN (Power): 54 mA at 24 Vdc
Electrical Connectors
- M12 for Ethernet (4-Pin, D-Coded) & for Power (5-Pin, A-Coded)
Enclosure, Body Material
- ABS
- Plastic
Environmental Protection
- IP65
Frequency
- Vibration Compatibility: 5 to 500 Hz
- WLAN (WiFi Channels): 2.4 GHz, Channel 1-11
- WLAN (WiFi Channels): 5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 36-140 (U-NII-1, U-NII-2A, U-NII-2C)
Humidity
- EN 600068-2-78: Damp Heat, 40° C (104° F), 93 % Humidity for 4 Days
Indication
- LED
Interface Connection
- Typical of Wired Interface: Ethernet
Mounting
- DIN Rail Mounting
- With Two Screws (Ø 4 mm) on Flat Surface
Operating Temperature
- -40° to 65° C (-40° to 149° F)
Output Power
- Bluetooth (RF Output Power): 10 dBm
- Bluetooth Low Energy (RF Output Power): 7 dBm
- WLAN (RF Output Power): 16 dBm
Power
- 9-30 Vdc (-5 % +20 %)
- Cranking 12 V (ISO 7637-2: 2011 Pulse 4)
Range
- 0 to 1,312 feet (0 to 400 metres) (WLAN & Bluetooth)
Reverse Polarity Protection
- Power: Protected Against Reverse Polarity
Shock
- 30 m/sec², 11 milliseconds
Storage Temperature
- -40° to 85° C (-40° to 185° F)
Vibration
- 1 G, 10 Sweep Cycles in Each Axes
- 2 G, 10 Sweep Cycles in Each Axes