Yodify Product Library
Instantly add the Appleton™ APPFT 25kAIC Power Distribution Panelboards and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

Appleton™ APPFT 25kAIC Power Distribution Panelboards

Brand: Appleton

Appleton™ explosionproof, dust-ignitionproof, watertight APPFT 25kAIC power distribution panelboards are used to furnish protection and control of electrical equipment in hazardous locations.

These compact units provide a centrally controlled switching system for large quantities of branch circuits for lighting, heating, small motors and similar electrical equipment.
Features
  • Explosionproof, dust-ignition-proof, watertight. Features a precision machined flame path between body and cover and an O-ring gasket to insure watertight integrity
  • Factory sealed; no external seals are required for most branch circuits. All conduits must be sealed adjacent to enclosure for Class I, Division 1, Groups C and D
  • 100 Amp or 225 Amp main lug
  • Up to 100 Amp backfed main breaker available with main lug chassis
  • Up to 225 Amp main breaker available with main breaker chassis
  • Factory installed ground and neutral bar as standard
  • Breaker operators included as standard and can be padlocked in the ON or OFF position
  • Breakers are housed in the panel section and prewired to maximum circuit capacity, then wired to numbered terminals in the wiring compartment
  • The terminal compartment is interconnected to panel section with sealing hubs, unions and poured with sealing compound
  • Permits selection of 1-, 2- or 3-pole breaker
  • Bolt on stainless steel slotted mounting feet
  • All panelboards are supplied with Cutler-Hammer interiors
  • Chassis assembles with mains at top (bottom optional). Provisions for 12, 18, 24, 30, and 36 circuit 1-pole chassis

Specifications

Brand

Material of Construction

  • Cover Bolts: Quad-Lead®, captive, Stainless Steel
  • Hinges: Stainless Steel
  • Bus Bars: Copper
  • O-ring: Neoprene
  • Stainless Steel Terminal Enclosure for Div. 2 Applications Only
  • Bodies, Cover & Breaker Operators: Copper-Free (4/10 of 1% Max.) Aluminum

NEC Certifications & Compliances

  • UL Standard: UL 1203
  • UL Classified: E84577

Standard Finishes

  • Corrosion Resistant Gray Epoxy Powder Coat to Provide NEMA 4X Rating

Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more