Yodify Product Library
Add the 6600 Series Magmeter to your store or catalog
Book Your Demo and See How
or create your store
6600 Series Magmeter
Brand: Niagara MetersThe Magmeter 6600 is an in-line electromagnetic flowmeter recommended for applications involving conductive liquids or slurries.
Features- Ease of Installation & Maintenance: Grounding rings not required; No moving parts
- Accuracy: High accuracy, ±0.5% of flow rate; Independent of fluid viscosity density, temperature, or solids content
- Does not affect process condition: Negligible pressure drop across flowmeter
Specifications
Brand
Accuracy
- ± 0.5 % of Rate over 10:1 Turndown 1/2" to 12"
- ± 1 % of Rate over 10:1 Turndown 14" to 24"
Approvals & Certifications
- FM3810 (General-purpose) for 1/2" to 24", FM3611 (Class I, Div. 2, Groups C, D) for 1/2" to 6"
Cable Length
- Remote 330 ft (100 metres) - max.
Enclosure Finish
- Coil, Flange, Electronic: Polyurethane Paint
Enclosure, Body Material
- Coil: Carbon Steel
- Electronic: Cast Aluminum
Environmental Protection
- IP67 (1 m Immersion in Water for 30 minutes)
Flange Material
- 304 Stainless Steel
- Carbon Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2" (DN 40) - 150# ANSI
- 1-1/2" (DN 40) - 300# ANSI
Flange Size - 1” (DN 25)
- 1" (DN 25) - 150# ANSI
- 1" (DN 25) - 300# ANSI
Flange Size - 1/2” (DN 15)
- 1/2" (DN 15) - 150# ANSI
- 1/2" (DN 15) - 300# ANSI
Flange Size - 10” (DN 250)
- 10" (DN 250) - 150# ANSI
Flange Size - 12” (DN 300)
- 12" (DN 300) - 150# ANSI
Flange Size - 14” (DN 350)
- 14" (DN 350) - 150# ANSI
Flange Size - 16” (DN 400)
- 16" (DN 400) - 150# ANSI
Flange Size - 18” (DN 450)
- 18" (DN 450) - 150# ANSI
Flange Size - 2” (DN 50)
- 2" (DN 50) - 150# ANSI
- 2" (DN 50) - 300# ANSI
Flange Size - 20” (DN 500)
- 20" (DN 500) - 150# ANSI
Flange Size - 24” (DN 600)
- 24" (DN 600) - 150# ANSI
Flange Size - 3” (DN 80)
- 3" (DN 80) - 150# ANSI
- 3" (DN 80) - 300# ANSI
Flange Size - 4” (DN 100)
- 4" (DN 100) - 150# ANSI
- 4" (DN 100) - 300# ANSI
Flange Size - 5” (DN 125)
- 5" (DN 125) - 150# ANSI
- 5" (DN 125) - 300# ANSI
Flange Size - 6” (DN 150)
- 6" (DN 150) - 150# ANSI
- 6" (DN 150) - 300# ANSI
Flange Size - 8” (DN 200)
- 8" (DN 200) - 150# ANSI
- 8" (DN 200) - 300# ANSI
Flange Type
- Raised Face (RF)
Flow Rate
- 20 mA Setting: 1.40 to 44,900 gpm
- Minimum Measurable: 0.14 to 220 gpm
Fluid
- Fluid: Conductive Liquids > 5 µS/cm
Frequency
- 0 to 1,000 Hz (Programmed Full Scale Flow Rate)
Materials of Construction
- Electrode: 316L Stainless Steel
- Electrode: Hastelloy C
- Electrode: Platinum-Rh
- Electrode: Titanium
- Liner: Hard Rubber (Ebonite) for 3" to 24"
- Liner: PTFE (Teflon) for 1/2" to 12"
- Metering Tube: 304 Stainless Steel
Mounting
- Angle
- Grounding Rings Not Required
- Horizontal
- Pipe Must be Full
- Vertical
NACE & NIST
- NIST Traceable-Certificate of Conformance up to 1,000 gpm
NPT Connection
- 1/2" NPT
Output
- 4-20 mA DC, 800 ohms, Max.
- Pulse: Open Collector 24 Vdc, 200 ohms min. Load, Programmable "ON" Time from 1 to 90 ms
Power
- 90-265 Vac, 50/60 Hz
Pressure Range
- bar: 10.34
- kPa: 1,034
- psi: 150