Yodify Product Library
Instantly add the WKv Series Low Energy Heat of Compression Compressed Air Dryers (Full Stream) and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
WKv Series Low Energy Heat of Compression Compressed Air Dryers (Full Stream)
Brand: ZanderParker Zander WKv series compressed air dryers are fully automatic dryers which utilize full flow regeneration principles to dry compressed air down to a pressure dew point of -20 °C.
WKv series dryers are so called heat of compression dryers (HOC), in contrast to conventional adsorption dryers, HOC dryers make use of excess heat from oil-free compressors to regenerate the desiccant beds thereby eliminating the requirement for an installed heater.
HOC dryers are therefore a cost and energy efficient solution.
WKv series come with a ZDMC controller as standard that offers full process visualization and advanced connectivity.
WKv series compressed air dryers are available for volume flows up to 14500 m³/h with a standard maximum operating pressure up to 10 barg.
Higher flow rates, operating pressures or temperature ratings are available on request.
Features- Volume flows up to 14500 m³/h @ 7 bar g
- Maximum operating pressure 10 bar g - higher pressures on request
- Pressure dew point: -10 to -50°C - lower dew points available on request
- Operation with up to 3 compressors
- Operation with low flows (30%)
- Very low operating costs by using the compressor heat - only cost is power for the control unit
- Very quiet operation - no purge / expansion, no blower or vacuum pump
- Low service costs - no heater, no blower, no load changes
Many additional options are available to suit specific customer requirements.
Specifications
Brand
Maximum Flow Rate (at 101 psig / PDP - 4° F)
- 247 to 8534 CFM
Maximum Operating Temperature
- 104° F
- 40° C
IP Protection Rating
- IP54
Minimum Ambient Temperature
- 1.5° C (Insulation Required if Temperature is Below 15° C)
Electrical Requirements
- 230 V, 50/60 Hz
Power Consumption
- depends on Design
Maximum Ambient Temperature
- 50° C
Minimum Operating Pressure
- 2.5 barg
Maximum Operating Pressure
- 145 psig
- 10 barg
Minimum Operating Temperature
- 68° F
- 20° C
Width
- 1250 to 3750 mm
Connection Type
- Flange According to EN 1092-1
Controller Type
- ZDMC2
Depth
- 950 to 2500 mm
Height
- 2355 to 4440 mm
Approvals & Certifications
- Others on Request
- PED
Water Consumption
- 3.50 m³/hour to 121.30 m³/hour
Dryer Technology
- Fully Automatic Adsorption Dryer with Heat of Compressor Usage for Full Flow Regeneration
Pressure Dew Point
- 14 to -58° F
- -10 to -50° C
Port Size
- DN 40 to DN 200
Weight
- 616 to 16350 kg