Yodify Product Library
Instantly add the CDL Gateway PLUS and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
CDL Gateway PLUS
Brand: Monico, Inc.Because of the wide range of uses of the equipment, many CAT® engines and generators are in remote locations and need the ability of a remote industrial protocol converter and industrial data logger. The CDL Gateway PLUS provides the ability to remotely monitor and control industrial engines, generators, compressors and other equipment from any location.
The email server is programmable to send email and SMS alerts to notify personnel of warnings and shutdowns. In addition, data from other devices within your Caterpillar® remote monitoring system can be converted and recorded on the same data map or made accessible through many other protocols through available ports.
The CDL Gateway PLUS™ retains all the communications and industrial protocol converter capabilities of the CDL Gateway™ Basic version, while adding many valuable IP related features including real-time data logging, Mail Server, Sync Server, Time Manager, and Color Touchscreen Virtual HMI. These features serve to increase the value of your Caterpillar® equipment by adding remote monitoring features usually costing much more.
More than a Remote Industrial Protocol Converter and Industrial Data Logger
As stated above, the PLUS version of this Gateway takes basic version’s protocol conversion abilities much farther. The real-time industrial data logging feature has proven extremely valuable for troubleshooting tough problems that require continuous real-time data from the engine and connected equipment.
The Gateway will accept up to a 2 GB Flash card that can store log files for 80 parameters every three seconds over approximately 200 days. These log files are stored in CSV formats for easy import into Microsoft Excel.
The trend and historical data provided by this feature are extremely important for high value industrial equipment to provide high-fidelity troubleshooting history for accurate diagnostics. Even if you have a high bandwidth SCADA system, the on-board industrial data logger can serve as a critical backup in case of communications link failure.
Features- Over 400 Pre-configured Parameters
- Full Fault and Diagnostic Code Support with Text Descriptions
- LED Indicating Lights for Power and Comms
- C-UL Approved for Class I Div II Groups A-D
- “Plug & Play” Operations
- Automatic Engine Detection and Configuration
- Free Access to MonicoView™ Software for Field Settings and Setup Adjustments
- Pulls Parameters at a Rate Between 20-60 parameters per second
- 10-15 Times Faster than Previous Customer Communications Products
Specifications
Brand
Temperature Ranges
- Operating: 0 °C to 50 °C
- Storage: -30 °C to 70 °C
Shock & Vibration
- Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g
- Shock to IEC 68-2-27: Operational 30 g.
Communications
- RS232 Programming Port
- RS232 Comms Port
- RS422/485 Port
- 10/100 Ethernet Port
- USB Port for User Interface
- CAT® Data Link Port for CDL
- CANbus Port for S.A.E. J1939
- Additional Ethernet, RS232, and RS485 Ports
Power Requirements
- 24 VDC ±10%
- Must use NEC Class 2 or Limited Power Source (LPS) rated power supply
LED Indicating Lights
- STS – Status LED indicates condition of gateway
- TX/RX – Transmit/Receive LEDs show serial activity
- Ethernet – Link and activity of LEDs
- CF – indicates card status and read/write activity
Memory
- On-board User Memory: 4MB of non-volatile flash memory
- On-board SDRAM: 2MB
- Memory Card: 2GB CompactFlash
Mounting
- Snaps onto standard DIN rail Mount in a panel near the engine
Certifications
- CE Approved
- EN 61326-1 Immunity to Industrial Locations
- Emission CISPR 11 Class A
- EN 61010-1: General Requirements
- EN 61010-2-201: Particular Requirements for Control Equipment
- RoHS Compliant UL Listed: File #E302106
- UL Hazardous: File #E317425
- ABS Certificate #09-HS426719-B-4-PDA