Yodify Product Library
Add the Clear Water & Immersion Turbidity Sensor to your store or catalog
Book Your Demo and See How
or create your store
Clear Water & Immersion Turbidity Sensor
Brand: TriOS Optical SensorsThe digital immersion sensor is used for optical turbidity measurement according to the 90° IR scattered light method in raw-, waste- and process waters up to 4000 NTU.
The digital bypass sensor is used for optical turbidity measurement according to the 90 ° IR scattered light method in pure water up to 100 NTU.
Features- Reliable concentration measurements by optical methods
- Pulsed infrared scattered light procedure
- No mechanically moving parts
- Digital reading
- Preprocessing in the sensor increases measurement sensitivity
Specifications
Brand
Measurement Principle
- 90° Scattered Light Method
Measuring Method
- Nephelometry
Electrical Connection
- 8-pin M12 plug
Power Supply
- 12-24 V
Power Consumption
- 3 W
Measuring Ranges
- 0 to 40, 0 to 400, 0 to 1000, (0 to 4000 opt.) NTU
- 0-10/0-100 NTU
Cable Specification
- Black PUR (Halogen Free), Shielded, M12 Plug
Measurement Wavelength
- 880 nm
Output Signal
- RS-485, Modbus RTU
Output Sizes - Accuracy
- ± 2 % Full Scale
- ± 1 % Full Scale
Resolution
- 0.01 NTU (full scale 10 NTU )
Data Interface
- RS-485, Modbus RTU
Response Time
- 90 % of the value in 5 s
Accuracy
- 98%
Calibration Method
- On Controller, through Analytical Multipoint Determination
Protection Type
- IP68
Process Temperature
- 0 to +60° C
- 0 to +50° C
Process Pressure
- 4 bar
Dimensions (Ø x L)
- 42 mm x 207 mm
Materials
- Black PVC or Stainless Steel Body, Special Glass Optics, Viton O-Rings
Thread
- 1" GAS
- Measurement of Turbidity in Drinking Water, Domestic Water, Circulating Water
- Measurement of Turbidity in Drinking Water Treatment Plants with Low Turbidity Values