Yodify Product Library
Instantly add the SCH-DCM Pressure Switch and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
SCH-DCM Pressure Switch
Brand: KOBOLD Instruments, IncWith few exceptions in the low pressure range, all pressure sensors are equipped with measuring bellows, partly made of a copper alloy but mostly in high stainless steel quality (1.4571). In comparison with the permissible values, the measuring bellows are subject to low loads and move only slightly.
This results in long service life with low switching point drift and high overpressure safety.
The movement of the measuring bellows is also restricted by an international stop so that the forces resulting from the overpressure cannot be transmitted to the switching mechanism.
The parts of the sensor in contact with the medium are welded together without additional materials and the sensors contain no seals.
Cu bellows which are used for low pressure ranges are soldered to the sensor housing. The sensor housing and all parts in the unit in contact with the medium can also be manufactured completely in stainless steel 1.4571 (series DNS).
The individual data sheets contain exact data on materials.
1 - 12 of 26 Part Numbers
SCH-DCM 025
- Switching Difference - Non-Adjustable
- Pressure Range - 0.04 to 0.25 bar
SCH-DCM 06
- Switching Difference - Non-Adjustable
- Pressure Range - 0.1 to 0.6 bar
SCH-DCM 1
- Switching Difference - Non-Adjustable
- Pressure Range - 0.2 to 1.6 bar
SCH-DCM 10
- Switching Difference - Non-Adjustable
- Pressure Range - 1 to 10 bar
SCH-DCM 1000
- Switching Difference - Non-Adjustable
- Pressure Range - 10 to 100 mbar
SCH-DCM 16
- Switching Difference - Non-Adjustable
- Pressure Range - 3 to 16 bar
SCH-DCM 25
- Switching Difference - Non-Adjustable
- Pressure Range - 4 to 25 bar
SCH-DCM 3
- Switching Difference - Non-Adjustable
- Pressure Range - 0.2 to 2.5 bar
SCH-DCM 40
- Switching Difference - Non-Adjustable
- Pressure Range - 8 to 40 bar
SCH-DCM 4016
- Switching Difference - Non-Adjustable
- Pressure Range - 1 to 16 mbar
SCH-DCM 4025
- Switching Difference - Non-Adjustable
- Pressure Range - 4 to 25 mbar
SCH-DCM 6
- Switching Difference - Non-Adjustable
- Pressure Range - 0.5 to 6 bar
1 - 12 of 26 Part Numbers
Specifications
Brand
Accuracy
- 1 bar
Ambient Temperature Range
- -15° to 60° C (5° to 140° F) - ATEX Version
- -25° to 70° C (-13° to 158° F)
BSP Connection
- G 1/2” Male
- G 1/4” Male
Cable Entry
- M16 x 1.5
Diaphragm Material
- Cu
- NBR
Electrical Rating
- 0.3 A at 250 Vdc Resistive
- 5 A at 250 Vac Inductive
- 8 A at 24 Vdc Resistive
- 8 A at 250 Vac Resistive
Element
- 304L Stainless Steel - Sensor Casing
- 316Ti Stainless Steel - Metal Bellows
- 430F Stainless Steel - Sensor Casing
- Cu+Ms - Sensor Casing
- Ms - Sensor Casing
- NBR - Membrane
Environmental Protection
- IP54, with Vertical Fitting Position
Mounting
- Vertically Upwards & Horizontal DCM 4016 & 4025 Vertically Upwards
Pressure Range
- bar: 0 to 130
- kPa: 0 to 13,000
- psi: 0 to 1,885
Process Fitting Details
- Directly in the Pressure Line (Pressure Gauge Connection) or on a Flat Surface with 2 - Off 4 mm Screws
Process Temperature
- 185° F (85° C) - Max.
Set Point Range
- bar: 0.01 to 63
- kPa: 1 to 6,300
- psi: 0.145 to 913.7
Switch Points
- Adjustable on the Spindle
Switch Type
- Single-Pole Change-Over Switch
System Pressure
- bar: 130
- kPa: 13,000
- psi: 1,885