Yodify Product Library
Instantly add the PEM-500 Electromagnetic Flowmeter and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

PEM-500 Electromagnetic Flowmeter

Brand: Aplisens S.A.

Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5 μS/cm. 

Device measures flow and volume of liquids in both directions of flow. For correct measurement pipe of sensor has to be fully filled by liquid. 

Sensor doesn’t have any mechanical parts inside flow tube which ensure undisturbed flow of medium. Flowmeter is able to measure flow of medium like pure liquids but also pastes and chemically aggressive liquids. 

It’s applicable is in water treatment facilities for flow measure of water and wastewater, chemical industry, food industry or heat plants.

Compact construction with ingress protection rating IP68 (special version) allows to bury device underground. Sensors and control unit of electromagnetic flowmeter PEM-500 can’t be disconnected by user. 

The casing of the control unit is made of aluminium alloy cast. User has no access to the electronic boards. Electrical connection of flowmeter is provided by the factory assembled cables. 

Wires in cables are marked by colours or numbers (detailed description available in table). Number of cable depends on version of power supply. 

Version with power supply 90-260 VAC is equipped with two separate cables – signal cable and power supply cable. 

Version with power supply 10-36 VDC is equipped with one signal-supply cable. In standard flowmeter is equipped with 3 m long cables. Other cable length are available on request. 

As an option PEM-500 flowmeter can be delivered with junction box PPPEM with ingress protection class IP67 with factory connected flowmeter’s cable which allows users connecting cables to terminals. 

Flowsensor tube have flanges (which allows to mount sensor in pipeline), inner electrodes and isolating pipe lining (both matched to measured medium). 

Electrodes in standard are made of stainless steel but as option user can choose other materials appropriate for chemical characteristic of measured medium.
Features
  • Nominal sice: DN 10...300 (ANSI 0.5...12")
  •  Maximum static pressure 1.6 MPa, 2.5 MPa or 4 MPa
  •  Accuracy 0.5%
  •  Output signal 4-20 mA, pulse output or frequecy output
  •  Communication interface Modbus RTU / RS485

Specifications

Accuracy

  • 0.5 % of Reading

Analog Output

  • 4-20 mA/500 Ω

Communication

  • Modbus RTU/RS-485

Power Supply

  • 90-260 Vac/50 Hz/15 VA
  • 10-36 Vdc/15 W (Reverse Polarity Protection)

Ambient Temperature

  • -20° to 60° C

Nominal Diameter

  • DN 10 to 300, ANSI 0.5” to 12”

Environmental Protection

  • IP67
  • IP68

Process Connection

  • Flange DIN, ANSI

Electrodes Material

  • 316L Stainless Steel
  • Hastelloy/Tantalum

Material of Construction

  • Casing and Flange: Carbon Steel Standard
  • Material of Lining: Hard Rubber, Teflon, PFA

  • Water Treatment Facilities
  • Chemical Industry
  • Food Industry
  • Heat Plants
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more