Yodify Product Library
Instantly add the MIST M46 RTD Temperature Transmitter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
MIST M46 RTD Temperature Transmitter
Brand: Intempco Controls, IncMIST M46 assemblies are designed for very corrosive environments such as plating shops and chemical processing plants.
Vapors from acids and various corrosive chemicals do not damage these sensors.
These assemblies are also the ideal solution for laboratory test applications where a high accuracy and dependable temperature measurement in corrosive liquids is required.
Designed for both 40° C (104° F) or (53.89° C) 129° F acid bath temperature sensor applications. M46 meets the anodize temperature spec of ±2° F or better.
Features- Factory calibrated 4-20 mA output to a customer specified temperature range
- Operating temperature range of -50° to 200º C (-58° to 392º F)
- Can be re-programed, re-calibrated in-house
- 1/2" or 3/4" NPT Teflon fitting
- Corrosion resistant
- Teflon jacketed 5/16" diameter probe with Teflon housing
- Cable supplied is a Teflon jacketed 22 AWG stranded 4-conductor, copper silver plated
- Probe lengths standard or custom
1 - 1 of 1 Part Numbers
MIST M46
- Temperature Range - -50 Custom Temperature Range In °C
- Output - 4-20 mA Loop - Upscale Burntout
- Probe Diameter - 3/8"
- Probe Materials - PTFE Teflon Clad 316 Stainless Steel Tube
- Probe Length - 1 Custom Probe Length in Inches
- Extension Cable Type 'F' - Teflon with Stainless Steel Armor, 200° C (392° F) Maximum
- Fitting Type - No Fitting
- Extension Cable Length 'F' - 6 Custom Extension Cable Length in Inches
1 - 1 of 1 Part Numbers
Specifications
Brand
Accuracy
- ± (0.10° C (0.18° F) + 0.10 % of Calibrated Span) with Two-Point Calibration
- ± (0.25° C (0.45° F) + 0.40 % of Span) with One-Point Calibration
Cable Material
- PVC
- Teflon
Cable Type
- 22 AWG Stranded 4-Conductor
Electrical - Free Leads
- 12” Long & Less are Single Stranded Leads, 22 AWG
Environmental Protection
- IP67 Hermetically Sealed
- NEMA 6P Hermetically Sealed
Input Impedance
- 1,000 ohms Min. (of Measuring Device, for Voltage Output)
Isolation
- 500 Vdc Input/Output
Materials of Construction
- Armor & Overbraid: Stainless Steel
- Shrink for Teflon Cable: Polyolefin
NPT Connection
- 1/2” NPT Male
- 3/4” NPT Male
Operating Pressure
- Sensor psig: 500 (kPa: 3,447, bar: 34.47)
Operating Temperature
- Housing: -40° to 80° C (-40° to 175° F)
Output
- 0-10 Vdc Linear to Temperature
- 0-5 Vdc Linear to Temperature
- 1-5 Vdc Linear to Temperature
- 4-20 mA Loop Powered, Linear to Temperature
Power Supply
- 12-32 Vdc Polarity Protected
Power Supply Effect
- 0.001 %/V
Process Connection Material
- Teflon
RFI/EMI Effect
- RFI: 1 % or Less Typical
RTD Type
- Pt100
Sensor Circuit
- 2.5 mA Downscale for 4-20 mA Output
- 24 mA Upscale for 4-20 mA Output
Sensor, Probe Connection
- 2-Wire
- 3-Wire
Sensor, Probe Diameter
- 3/8” (9.5 mm)
- 5/16” (0.79 cm)
Sensor, Probe Material
- PFA Teflon Clad 316 Stainless Steel Tube
- PTFE Teflon Clad 316 Stainless Steel Tube
Sensor, Probe Type
- RTD
Stability
- Long Term Drift: ≤ 0.1 % of Full Scale Per Year
Storage Temperature
- -40° to 80° C (-40° to 176° F)
Temperature Effect
- ± 0.001 % of Span/°C
Temperature Range
- -50° to 200° C (-58° to 392° F)
Update Time
- Warmup: 30 seconds
Wetted Materials
- 316 Stainless Steel, Dual Certified
- 316L Stainless Steel, Dual Certified
- Industrial Design, Hermetically Sealed, With Extension Cable
- All Teflon Construction
- Connection: 1/2" and 3/4" Teflon
- Acid Bath Temperature Sensor
- Meets Anodize Temperature Spec