Yodify Product Library
Instantly add the WE-500 Series Weatherproof Electric Actuator and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
WE-500 Series Weatherproof Electric Actuator
Brand: A-T Controls, IncThe WE-500 Electric Actuator is a compact design actuator used for small ball valves: 2” and less, dampers and other quarter-turn devices.
The actuator is TYPE 4, 4X and includes a visual indicator, two auxiliary switches and a compartment heater.
A convenient wrench manual override shaft is standard on the WE-500.
This actuator is the clear choice when a compact, efficient electric actuator is required.
Features- Compact and Light Due to High Grade Aluminum Alloy Housing.
- High Resistance to Corrosion Due to Hard Anodizing on Inside and Outside with Polyester Powder Coating on External Surface.
- Output Torque: 530 in-lbs. / 530 Inch-Pounds
- The Actuator Motor is a Reversible, High Torque and Low Current Design.
- Weatherproof: IP67, Type 4, 4X
1 - 3 of 3 Part Numbers
WE-500XD
- Electric Actuator: On/Off
- Torque: 500 In-Lbs
- Operating Time: 12 Seconds
- Voltage: 115VAC/1PH
- Indication: Open/Off/Close Control Box with LED Lamps for Open and Close
- On-Off Control
- ISO Mounting
- 2 Auxiliary Limit Switches with 4 Independent Cams
- Diecast Aluminum Polyester Coated Construction
- (2) 1/2" NPT Conduit Connections
- F03/F05/F07 ISO Mounting Pad
- 14mm (0.551) Star Output Drive
1 - 3 of 3 Part Numbers
Specifications
Brand
Actuator Type
- Electronic Modulating Card (4-20 mA, 1-5 mA, 0-10 Vdc, 1-5 Vdc, 0-135 ohm Command Signal)
Ambient Temperature Range
- -20° to 70° C (-4° to 158° F), Optional -40° C (-40° F) Low Temp Kit
Approvals & Certifications
- American Water Works Association (AWWA) C540-93
- CSA
Conduit Connection
- 2 x 1/2” NPT
Duty Cycle
- 1800 Start/Hour at Full Load at 70° C (158° F)
Electrical Connectors
- Terminal Block (11P)
Electrical Rating
- 5 A at 125 Vac, 3 A at 250 Vac, 0.4 A at 125 Vdc, 0.2 A at 250 Vdc
Enclosure Finish
- Anodizing Treatment Before Dry Powder, Polyester
Environmental Protection
- Weatherproof IP67/Type 4, 4X, 6 (CSA)
Heater
- 2 W (110/220 Vac) Anti-Condensation Space Heater
Indication
- Visual Indicator
Materials of Construction
- Al Bronze
- Aluminum Alloy
- Polycarbonate
- Steel
Motor Type
- Class F Reversible Induction Motor
Motor Voltages
- 115 Vac / 1-Phase
- 12 Vdc
- 220 Vac / 1-Phase / 50/60 Hz
- 24 Vac / 1-Phase
- 24 Vac/Vdc
- 24 Vdc (Requires Additional Relays for Customer Supplied Wiring)
Mounting
- ISO 5211 (F03/F05/F07)
Operating Time
- Operating Time (60/50 Hz, 90°): 12/14 seconds
Operation
- 120°
- 180°
- 270°
- 90°
Options
- 1,000 ohm Potentiometer
- 10,000 ohm Potentiometer
- -40° C (-40° F) Low Temp Kit
- 4-20 mA Transmitter
- 5,000 ohm Potentiometer
Output
- 0-10 Vdc
- 1-5 mA
- 1-5 Vdc
- 4-20 mA
Override
- Manual Override: Drive Nut (Hexagon Design)
Switch Quantity
- Standard Four Limit Switches. Two for Operation, 2 Auxilliary Dry Contacts
Switch Type
- Open/Close SPDT
Torque
- 530 In/Lbs
Vibration
- XYZ 10 G, 0.2~34 Hz, 30 minutes
Documentation
Certifications and Approvals
Schematic
- WE-500 Dimensional Drawing pdf 158 KB
- WE-500 Electric Actuator Wiring Diagram, 115VAC/1PH, Two Position pdf 151 KB
- WE-500A Electric Actuator Wiring Diagram, 24VAC/1PH, 4 Wire, Two Position pdf 130 KB
- WE-500A Electric Actuator Wiring Diagram, 24VDC, 4 Wire, Two Position pdf 152 KB
- WEM-500 Dimensional Drawing pdf 182 KB
- WEM-500 Wiring Diagram, 110/220VAC 1PH with TMC-4 Control Card pdf 86 KB
- WEM-500 Wiring Diagram, 115VAC/1PH with TMC3 Servo Card pdf 83 KB