Yodify Product Library
Instantly add the Type T Deadweight Tester and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Type T Deadweight Tester
Brand: M&G CalibrationThe Type T tester is a dead weight tester that offers laboratory accuracy in an instrument designed to withstand an industrial environment or daily stresses of a manufacturing environment.
Each tester features a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, helping to maintain accuracy as test pressures increase.
A dual volume pumping feature allows a large volume of fluid to be added at low pressures to fill the system and increase pressure rapidly.
Once filled, switch to a smaller volume to easy pumping and provide finer control at higher pressures.
Features- Accuracy to 0.015% of reading
- Ranges to 15,000 psi
- Available in psi, kg/cm², bar, and kPa
- Small incremental weight sets available
- Overhung weight carrier reduces side thrust and friction
- Over-pressure protection prevents piston damage
- 3-leg design with bulls-eye leveling system
- Single and dual column versions available to meet a wide variety of applications
Specifications
Brand
Model
- Type T
Type
- Hydraulic, Piston Gauge
Pressure Range
- To 100,000 kPa / 15,000 psi (model dependent)
Accuracy (12 Months)
- to ± 0.015 % Reading
Increments (Low - min)
- 5 psi, 0.5 kg/cm², 0.5 bar, 50 kPa
Increments (High - min)
- 50 psi, 5 kg/cm², 5 bar, 500 kPa
Increments (Small)
- Small Incremental Weight Sets Available
Gravity
- 9.80665 m/s² (International Standard)
- Local Gravity Available (specify when ordering)
Piston/Cylinders
- Single or Dual (As ordered)
Columns
- Single or Dual (As ordered)
Weight Sets
- Single or Dual (As ordered)
Pressure Source
- Lever Action, Hand-Actuated, Dual Volume Hydraulic Pump
Medium
- Distilled Water/Alcohol Mix (Standard) or AAA Oil (Optional) (specify when ordering)
Reservoir Capacity
- 1.23 l / 75 in³
Displacement (High Range)
- 2.8 to 3.2 cm² / 0.17 to 0.20 in³ per stroke
Displacement (Low Range)
- 0.30 to 0.40 cm² / 0.018 to 0.024 in³ per stroke
Wetted Surfaces
- 300 Series Stainless Steel, Monel
O-rings
- Buna-N (Standard), EPT (Optional), Viton (Optional) (specify when ordering)
Test Connections
- 1/4” NPT, 1/2” NPT, 7/16 UNF-1/4” BSP and 1/2” BSP (with Metric Models)
Weight Material
- Hard, Non-Magnetic Alloy (Imperial Units), Stainless Steel (± 0.015 % Imperial and Metric Models), Aluminum (Small Incremental Weight Sets)
Engineering Units
- psi, kg/cm², bar, kPa
Cases
- Up to 4 (Model and Configuration Dependent)
Weight - Tester & Case
- 22.7 kg / 50 lbs
Weight Sets
- 25 kg to 95.3 kg / 55 to 210 lbs
Configuration
- Single or Dual Piston/Cylinder, Single or Dual Column Hydraulic Deadweight
Delivery
- Pump, Piston(s), Weight Set(s), Tools, Manifold, Adapters, Column Base, Tubing (Dual-Column Models), Manual, and NIST Traceable Certification